Proheat T-II - Manual (Page 17)

15
The “Manual” button is used to turn the
heater on and off when desired regardless of
set Timers.
STEP 1 Press “Manual” to activate the heater. (Red
LED will go on and the heater will operate
indefi nitely (factory preset) or up to 9.5 hours
if Manual Mode Runtime is set.)
STEP 2 Press “Manual” again to de-activate the
heater. (Red LED will go out and the heater
will turn off.)
“Manual” & “Timer” cannot be active at the
same time. If “Manual” is active and “Timer”
is pressed, the heater will turn off and the
Red Manual LED will go out.
T-II
Manual Heater Operation