Installing the receiver and transmitter batteries – Pro Boat PRB3800 User Manual

Page 6

5. Place the radio box cover back onto the

radio box. Make sure it snaps tighly onto

the radio box to ensure a water-tight seal.

Transmitter Batteries

1. Remove the transmitter from the box.
2. Remove the battery cover on the bottom

of the transmitter.

3. Install the AA batteries into the

transmitter. Be aware of the proper

polarity when inserting the batteries.

4. Replace the battery cover to complete the

battery installation.

5. Turn on the radio to ensure the batteries

have been installed correctly. All 3 LEDs

will illuminate, indicating fully charged

batteries.

6. Turn the radio off to prevent accidentally

running the voltage out of the batteries.

Installing the Receiver and Transmitter Batteries