Installing the receiver and transmitter batteries – Pro Boat PRB3800 User Manual

Page 5

Installing the Receiver and Transmitter Batteries

Receiver Batteries

1. Lift the cockpit from the hull from the

rear. It is held in position using magnets

so there will be a little resistance when

lifting upward.

2. Lift the radio compartment hatch from the

radio compartment.

3. Remove the dry cell battery holder from

the radio box. Install four AA alkaline

batteries as shown with respect to polarity.

4. Place the battery holder back into the

radio box. Confirm the switch is in the "off"

position after installing the batteries.