Pro Boat PRB3650 - Manual (Page 8)

8
 13. Place the clear battery cover
back into position. Be sure the longer
antenna wire is extended through the
antenna tube and the short antenna
wire is clear of any moving parts
inside the hull.
The Pro Boat spread spectrum radio
system allows a large number of RC
decoys to be operated simultaneously
and offers interference-free control
from hundreds of yards away. If
you wish to operate the decoy with
the antenna hidden, range will be
decreased substantially.
Note: The radio system is pre-
bound at the factory but the
2.4GHz radio system may not bind
correctly if the radio is adjacent to
a large amount of metal such as
an aluminum dock. Read the radio
manual for binding details.
Gently place the decoy into the water.
If it leans to one side, move the
battery to balance the decoy.
When the decoy begins to slow, bring
the decoy in to shore and recharge
the battery.
 14. (Optional) The retrieval decoy
can be attached to the main decoy by
connecting the link from the retrieval
decoy to the connector near the
antenna on the main decoy. Use the
retrieval decoy for added realism, or
for retrieving other models that may
have stopped far from shore, as well
as harvested waterfowl by circling the
object and snagging it with the gaffe.
Go to ProBoatmodels.com to
see our full line of RC boats and
accessories and a video of the
retrieval decoy in action.
If the input screen becomes clogged
with debris, the reverse function can
occasionally blow the debris clear
of the duct input. It may become
necessary to disassemble the drive
system to remove debris from the
drive system. It is recommended
to stay clear of moss to lessen the
possibility of clogging the drive.
Lubricate all moving parts with a light
household oil after each boating session
to prevent binding and corrosion.
Maintenance