Pro Boat PRB3650 - Manual (Page 6)

6
 4. Slide the battery cover back on the
bottom of the transmitter.
Note: Center the trim adjustments
for both the steering and throttle on
your transmitter before turning the
transmitter on.
 5. Move the switch on the transmitter
to the ON position and confirm that
the red and green LEDs illuminate.
Turn off the transmitter.
 6. Lift the cover from the hull. The cover
is held at the rear using two magnets,
and at the front with one magnet.
 7. Remove the radio box cover from
the hull by lifting it up and away from
the hull.
 8. Apply the hook and loop tape to the
bottom of the battery. Also apply the
mating piece of tape in the hull where
the battery will be located.