Pro Boat PRB2400 - Manual (Page 7)

❍ 11. Open the rigging clip and attach it to the
eye plate marked "C." Close the wire clip.
❍ 12. Carefully unwrap the mid-line rigging
marked "D."
❍ 13. Open the rigging clip and attach it to the
eye plate marked "D." Close the wire clip.
❍ 14. Carefully unwrap the lower rigging marked
"E." Open the rigging clip and attach it to the
eye plate marked "E." Close the wire clip.
❍ 15. Repeat Steps 9 through 14 for rigging lines
"F," "G," and "H" (in that order).
Section 2 – Rigging Installation
7