Pro Boat PRB2400 - Manual (Page 10)

❍ 1. Locate the jib stay on rigging lines "C" and "F."
Pull up carefully on the jib stay to adjust the
tension so there is no slack in the line.Work
slowly and adjust both lines so the main mast
is completely vertical.
❍ 2. Repeat Step 1 for the rigging lines paired
"D&G" and "E&H."
❍ 3. Adjust the jib stay on the rigging line at the
bow "A" and stern "B" of the boat.Tension the
rigging lines so the mast is perpendicular
(square) to the hull of the boat.
Section 4 – Adjusting the Rigging Cables
10