Pro Boat PRB2400 - Manual (Page 4)

❍ 1. Locate the cardboard box containing the sails
and hardware. Remove the two-piece mast. Also
remove the keel, boat stand and hardware bag.
Place the hull on the boat stand.
Note:The sails will be rolled
around one section of the mast.
❍ 2. Locate the keel. Slide the keel into the hull
from the bottom of the hull.The rounded end
will face the bow (front) of the boat. Use the
supplied nut to secure the keel to the hull.
Note: Use threadlock on the nut
to keep it from loosening during
operation.
❍ 3. Slide the upper and lower mast halves
together.The notch in the upper mast will align
with the screw in the lower mast.
4
Section 2 – Rigging Installation