Pro Boat PRB2400 - Manual (Page 5)

❍ 4. Slide the mast assembly into the fitting on
the top of the hull.
❍ 5. Carefully unroll the sails from the mast.The
main sail will be attached to the top of the mast
at the crane.The jib sail will be attached to the
upper mast as shown.
❍ 6. Locate the main sail boom.The boom will
connect to the boom mount at the point
marked "I." Remove the brass eyelet, screw
and nut from the hardware bag. Slide the brass
eyelet into the end of the main boom. Slide
the screw through the eyelet and use a Phillips
screwdriver to secure the screw. Apply a drop
of threadlock on the nut and thread it onto the
screw from the bottom of the boom mount.
Section 2 – Rigging Installation
5