Operating modes overview – PRG Node Plus User Manual
Page 17
PRG NODE PLUS USER MANUAL
15
Operating Modes Overview
The PRG Node Plus unit operates in one of three modes: Vx76, Virtuoso, or Art-Net (Series 400). The mode will
depend on the system setup.
+
Vx76 Mode - In this mode, the unit will accept Vx76 protocol and generate
both
Art-Net and DMX512 outputs.
+
Virtuoso Mode - In this mode, the unit will accept Virtuoso protocol and generate
both
Art-Net and DMX512
outputs.
+
Art-Net (Series 400) Mode - In this mode, the unit will accept Art-Net protocol and convert it to DMX512. (When
used with the Series 400 rack, the Node will follow the selected A, B, or C system.)
Important Note Regarding the
Series 400 Setup
Screen in Vx76 and Virtuoso Modes
When operating in either the Vx76 or Virtuoso mode, a legacy "Series 400 Setup" screen is still available in the menu.
This is an obsolete screen and should no longer be used for Series 400 (Art-Net) setup. The new "Series 400 Setup"
screen is available when the Node has been loaded with Series 400 software, and should be used to setup the Art-Net
system as detailed in
PRG NODE PLUS
[ Vx76 Mode ]
Vx76
Protocol
Art-Net and DMX512
PRG NODE PLUS
[ Virtuoso Mode ]
Virtuoso
Protocol
Art-Net and DMX512
PRG NODE PLUS
[ Art-Net Series 400 Mode ]
Art-Net
Protocol
DMX512
OBSOLETE "SERIES 400 SETUP" MENU
Series 400 Setup
000 001 002 003 004 005
numeric
Info
Ser400
DmxMon
Series 400 Setup
000 001 002 003 004 005
numeric noMerge
Addr
Setup
DmxMon
a
- Available in Vx76 and Virtuoso Modes -
DO NOT USE!
NEW "SERIES 400 SETUP" MENU
- Available in Series 400 Mode -
USE FOR ART-NET SETUP