Specifications, Power characteristics, Physical characteristics – PRG OHM User Manual 1.12 User Manual
Page 23: Optical characteristics
OHM™ LIGHT USER MANUAL
21
SPECIFICATIONS
Power Characteristics
AC Power
+
Nominal input voltage: 110-240V (AC), 50-60Hz
+
Maximum input current: 4.5A (at 110V), 2.1A (at 240V)
+
Maximum input power: 500W
Physical Characteristics
OHM Dimensions (Excluding Yoke)
+
740 mm x 660 mm x 290 mm
+
(29.1" x 26" x 11.4")
OHM Weight (Excluding Accessories)
+
32kg
Optical Characteristics
The waterfall diagram shows a typical spread of light when OHM is suspended at a height of 10 feet. Measurements
are done on a temperature-stabilized OHM at maximum intensity.
OHM Power requirements...
OHM power supply is not currently power factor
corrected. OHM Lights will draw more current on
the neutral than what is being drawn on the hot
leg. On large installations it may be necessary to
increase your neutral run so as not to exceed
cable current capacity.