Potter RA-7692 - Manual (Page 14)

14 Annunciator Manual • 8910224 • Rev C • 6/09
OFF when the system is operating correctly.
Pulse (1 second on, 1 second off) when there is a problem with the
system. Call for service.
Green Power LED
ON when AC and battery power are okay.
OFF during AC trouble.
Flash (½ second on, ½ second off) when the system battery is low
or missing.
Zone Alarm and Trouble LEDs
Red Zone Alarm LEDs
ON steady during an alarm condition.
OFF when the zone has restored to normal and a Sensor Reset has
been performed.
Yellow Zone Trouble LEDs
ON during a trouble condition.
OFF when the zone restores to normal.
Pulses if the zone alarm or trouble is a Supervisory type zone.
Alert Tones
Steady Tone indicates a trouble condition on the system or a fire
zone. Follows the operation of the bells.Pressing any key silences
a steady alert tone.
1 Short Beep is emitted each time a key is pressed or a valid
function is entered.
4 Short Beeps are emitted when an incorrect key or function is entered.
Keyboard Backlighting
The keyboard on the RA-7692 lights any time a key is pressed
or the alert buzzer sounds making it easy for a user in a darkened
room to enter their code or perform a command function.
Annunciator Function Keys
SILENCE
Press the SILENCE key and enter the user code to silence a
system alarm and the keypad sounder. You may also use the
SILENCE key to silence the bells during the Fire Drill function.
RESET
Press the RESET key and enter the user code to reset a zone after
an alarm.
This resets all zone alarm LEDs and momentarily drops power to
the panel’s zones 2 to 5 and smoke power output.
TEST
Press the TEST function key and enter the user code to initiate the
panel’s System Test function.
This test rings the panel bells for 2 seconds, checks the battery
charge level, and sends a system test report to the central station
on monitored systems.