Perfect Aire 1PAMSH36-MZO4-16 User Manual - Manual (Page 8)

7
Manul operation can be used temporarily in case you cannot find the remote control or
test running purpose or necessary maintenance.
OPERATING INSTRUCTIONS
Manual operation
NOTE: This manual does not include Remote Control Operations, see the
<> packed with the unit for details.
Operating temperature
Manual
control button
AUTO/COOL
Model A
Model B
Manual
control button
NOTE: For DUCT and CEILING type, CASSETTE
type, CEILING and FLOOR type and FLOOR and
STANDING type, please refer to the previous pages
to operate the Manual button.
Open and lift the front panel up to see the
manual control button (see Model A).
For some models, the manual control button is
located at the bottom of the unit (see Model B).
One press of the manual control button will
lead to the forced “AUTO” operation. If the button
is pressed twice within five seconds, the unit
will operate under forced “COOL” operation.
Close the panel firmly to its original position. 1
3
2
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
Mode
Temperature
Room temperature
Outdoor temperature
1. Optimum performance will be achieved within these operating temperatures. If air
conditioner is used outside of the above conditions, certain safety protection features
might come into operation and cause the unit to function abnormally.
2. If the air conditioner operates in a room whose relative humidity is less than 80%
the surface of the air conditioner may attract condensation. Please set the vertical
air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
NOTE:
Cooling operation Heating operation Drying operation
62ºF (17ºC)
(5ºF~122ºF / -15ºC~50ºC:
For the models with low
temperature cooling system)
(0ºC~50ºC)
86ºF (30ºC)
5ºF~76ºF
Manual control button
>62ºF (17ºC)
32ºF~122ºF
(-15ºC~24ºC) (0ºC~50ºC)
32ºF~122ºF
>