Perfect Aire 1PAMSH36-MZO4-16 User Manual - Manual (Page 21)

20
TROUBLESHOOTING TIPS
Stop the air conditioner immediately if one of the following faults occur. Disconnect the
power and contact the nearest authorized customer service center.
Fuse blows frequently or circuit breaker trips frequently.
Other objects or water penetrate the air conditioner.
The remote control won't work or works abnormally.
Other abnormal situations.
Trouble
Malfunctions
Unit does not
start
Unit not cooling
or heating
(Cooling/ heating
models only)
room very well
while air flowing
from the air
conditioner
Cause
Power outage.
Fuse may have blown or a circuit breaker
has been tripped.
Battery in remote control may have
been exhausted.
The time you have set with timer is
incorrect.
Wait for power to be restored.
Replace the fuse or flip the circuit breaker.
Replace the battery.
Wait or cancel timer setting.
Set temperature correctly. For detailed
method please refer to "Remote
Control instruction" manual.
Clean the air filter.
Close the doors or windows.
Turn off unit. Clear obstructions away
first, then restart the unit.
Wait approximately 3 minutes for
compressor to turn on and the unit to
begin cooling/heating.
Inappropriate temperature
setting.
Air filter is blocked.
Doors or windows are open.
Air inlet or outlet of indoor or
outdoor unit has been blocked.
Compressor time delay has
been activated.
If issue has not been corrected, please contact a local authorized dealer or the nearest customer
service center. Be prepared to provide detailed malfunctions and unit model.
Notes: Do not attempt to repair the unit yourself.
Always consult an authorized service provider.
What should be done?
If the E( 0,1.......) or P( 0, 1 .......) code appears on the LED (LCD) window, disconnect the
power and contact the service people.