Perfect Aire PATCH10000 - Manual (Page 6)

AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel and remote control and all its
functions, then follow the symbol for the functions you desire.
The unit can be controlled by the unit control panel alone or with the remote control.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Fig.3
NOTE: This manual does not include Remote Control Operations, see the Remote Control
Instructions packed with the unit for details.
OPERATION PANEL OF THE AIR CONDITIONER
Selects the appropriate operating mode. Each
time you press the button, a mode is selected
in a sequence that goes from AUTO, COOL,
DRY, FAN and HEAT (on models with heating
function). The mode indicator light illuminates
under the different mode setting.
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same
time, for 3 seconds.
Used to initiate the AUTO ON start time
and AUTO OFF stop time program, in
conjuction with the & buttons.
3 UP ( ) and DOWN ( ) buttons
Used to adjust (increase/decrease)
temperature settings (2°F/1°C increments)
in a range of 62°F (17°C) to 88°F (30°C) or
the TIMER setting in a range of 0-24 hrs.
Use this button to initiate/cancel the auto
swing feature .
2 SWING button
1 MODE select button 5
Power switch on/off.
POWER button
7 SPEED button
TIMER button 6
8
Used to initiate the SLEEP operation.
SLEEP button
9
10
Shows the set temperature in " O C" or " O F" and
the Auto-timer settings. While on DRY and
FAN modes, it shows the room temperature.
(Details about error codes that may appear
on the display can be found on the next page.)
LED Display
Press to select the fan speed in four steps-
AUTO, LOW, MED (on some models) and
HIGH.The fan speed indicator light illuminates
under different fan settings except AUTO
speed. When AUTO fan speed is selected,
all the fan indicator lights turn dark.
ION MODE
SWING
SLEEP
SPEED
DRY
COOL
AUTO
FOLLOW
ME
FAN HEAT ION SLEEP TIMER OFF TIMER ON
HI
MED
LOW
3 3 2 1 5 7 6 8
9
4
Remote signal receptor
10
Press the ION button; the ion generator
is energized and will help to remove
pollen and impurities from the air,
trapping them in the filter. Press it again
to stop the function.
4 ION button (optional)
To activate the FOLLOW ME feature,
the indicator light flashes.
FOLLOW ME indicator
5