Perfect Aire PES5000 - Manual (Page 7)

TO TURN UNIT ON:
NOTE: The following instructions represent the Unit Controls.
The same instructions can be used for the Remote Control.
TO CHANGE TEMPERATURE
SETTING:
Press the
“On/Off” button.
DO THIS:
Press to adjust
temperature setting
DO THIS:
Press or hold either Up ( ) or Down ( ) button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62ºF(17ºC) and
86ºF(30ºC).If you want the display to read
the actual room temperature, see “To Operate
on Fan Only” section.
NOTE: (UP/DOWN button)
TO ADJUST FAN SPEEDS:
Press “Fan” to
select fan speed
DO THIS:
NOTE: (FAN button)
There are four (4) fan speeds: “Auto,” “Low,”
“Med” or “High.” Each time the button is pressed,
the fan speed mode is shifted. On “Dry” mode
the fan speed is controlled at low automatically.
NOTE: The unit will automatically initiate the
Energy Saver function under “Cool,” “Dry” and
“Auto” (only Auto-Cooling and Auto-Fan) modes.
High
Fan
Fan Mode
Energy
Saver
Follow
Me
TEMP/TIMER
On
Off
Timer
Low
Auto
Med
High
TEMP/TIMER
Auto
Cool
Dry
Fan
Fan Mode
On
Off
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
TO SELECT THE
OPERATING MODE:
Press the
“Mode” button.
DO THIS:
To choose operating mode, press the “Mode” button.
Each time you press the button, a mode is selected
in a sequence that goes from “Auto,” “Cool,” “Dry,” and
“Fan.” The indicator light will be illuminated and remain
on once the mode is selected.
The unit will automatically initiate the Energy Saver
function under “Cool,” “Dry,” and “Auto” (only
Auto-Cooling and Auto-Fan) modes.
NOTE: MODE button
To operate on “Auto” feature:
When you set the air conditioner in “Auto” mode, it will
automatically select cooling or fan only operation depending
on what temperature you have selected and the room
temperature.The air conditioner will control room
temperature automatically around the temperature you set.
In this mode, the fan speed cannot be adjusted.
It starts automatically at a speed according to the
room temperature. If the room does not get too warm,
it will stay at “Low” speed.
Low
Auto
Med
High
Auto
Cool
Dry
Fan
Fan Mode
Off
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
Low
Auto
Med
TEMP/TIMER
Auto
Cool
Dry
On
Off
Sleep
Timer
Check
Filter
AIR CONDITIONER FEATURES (CONTINUED)
6