Chicago Electric 67616 - Manual (Page 12)

Page 12 For technical questions, please call 1-800-444-3353. Item 67616
maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO pREVEnt SERiOuS injuRY FROm aCCiDEntal OpERatiOn:
Release the trigger and unplug the tool from its electrical outlet before
performing any inspection, maintenance, or cleaning procedures.
tO pREVEnt SERiOuS injuRY FROm tOOl FailuRE:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, maintenance, and lubrication
1. BEFORE EaCh uSE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. aFtER uSE, wipe external surfaces
of the tool with clean cloth.
3. pERiODiCallY, and after each prolonged
and extensive application, blow compressed
air the motor housing slots to remove
any accumulated dirt and debris.
4. WaRninG! if the supply cord of this
power tool is damaged, it must be replaced
only by a qualified service technician.
Sa
FE
tY
Op
ER
ati
O
n
m
aint
Enan
CE
SE
tup