Tape operation / recording, Preparation for recording, Synchro start cd recording – Philips MCM25037 User Manual
Page 16: One touch recording, Recording tinner, Recording timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Tape Operation / Recording
Preparation for recording
1
Select
TAPE
source.
2
Load a recordable tape into tape deck with full
spool to the left.
3
Prepare the source to be recorded.
CD
- load the disc.
TUNER
-tune to the desired radio station.
AUX
- connect external equipment
When recording is in progress
REC
starts flashing.
•
To stop recording, press ■.
•
It is not possible to listen to another source.
•
It is not possible to activate the timer function.
Synchro start CD recording
1
Select
CD
s
#
Press or (N or N) to select the
desired track to start recording.
•
You can programme the tracks in the order you
want them to be recorded (refer to "CD/MP3-
CD Operations - Programming the disc tracks").
2
Press
REC
to start recording.
Playing of the CD programme starts
automatically from the beginning of the CD
after 7 seconds. It is not necessary to start the
CD player separately.
One touch recording
1
Select
CD, TUNER
or
AUX
source.
2
3
Press
REC
to start recording.
If necessary, start playback of the selected
source.
Recording tinner
To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1
Select the preset radio station to record from
(refer to "Radio Reception -Tuning to preset
radio stations").
2
In standby mode, press
TIMER SET
for more
than two seconds.
0
flashes and a source is displayed.
3
Press
SOURCE
repeatedly until “RECTUN”
source is displayed.
4
Press
TIMER SET
to confirm the source.
"SET ON TIME"
is displayed, 0- and the
clock digits for the hours flash.
5
Press
VOLUME
+/— to set the hours.
6
Press
TIMER SET
again.
The clock digits for the minutes flash.
7
Press
VOLUME
+/—• to set the minutes.
8
Press
TIMER SET
to confirm the recording
start time.
"SET OFF TIME"
is displayed, 0 and the
clock digits for the hours flash.
9
Repeat steps
5-7
to set the finish time.
10 Press
TIMER SET
to confirm the timer settings.
.0 is shown and the recording timer is now
set.
Note:
- The recording timer will not be activated if the
system is in tape play mode.
16
pg 001-020/M250/21-Eng
4
-
7:05PM
3140115 29261