Philips MCM25037 - Manual (Page 10)

4
-
L
I
Controls
(illustrations on page 3)
Controls on the system and
remote control
© STANDBY ON (!)
- to switch the system on or to standby mode.
@ Display screen
- to view the current status of the system.
@ SOURCE
- to select the respective sound source : CD,
TUNER, TAPE or AUX.
© BAND / DISPLAY
for Tuner...........to select waveband : FM or MW.
for CD/MP3-CD...to select disc information
display mode.
© PROGRAM
for CD/MP3-CD.. .to programme disc tracks.
for Tuner.......... to programme preset radio
stations.
® AT PRESET/MP3«ALBUM/TIMER SET
for MP3-CD...... to select previous/next album.
for Tuner.......... to select a preset radio station.
for Timer (A) ... (on the system only) to set the
timer function.
©{◄◄►►i TRACK«SEARCH«TUNE
►►on remote control)
for CD............... to fast reverse/forward the disc.
for CD/MP3 CD...(on the system only) to select
a desired track
for Tuner.......... to tune to a lower or higher
radio frequency.
for Tape............to rewind or fast forward.
® Tape deck
® OPEN A
- to open tape compartment.
® RECORD
- to start recording.
@ ►!! / CLOCK
for CD/MP3-CD...to start or interrupt playback
forTape............. to start playback
for Clock........... (on the system only) to set the
clock function.
@ ¡R sensor
- infrared sensor for remote control.
® OPEN'CLOSE A
- to open or close the disc tray.
® MODE
- to shuffle and repeat a track/disc.
@ M / N
- to select a desired track.
® DSC (Digital Sound Control)
- to select the desired sound effect: OPTIMAL/
ROCK/JAZZ/POP
® IS/DBB (Incredible Surround/Dynamic
Bass Boost)
- to create a super-enhanced stereo effect.
- to enhance the bass.
@ MUTE
- interrupts and resumes sound reproduction.
(g) TIMER
- to activate/deactivate the timer function.
@ SLEEP
- to activate/deactivate or set the sleep timer.
(§) (!)
- to switch the system to standby mode.
4
-
for CD/MP3-CD.. .to stop playback or to clear a
programme.
forTape............. to stop playback or recording.
) VOLUME +/-
to increase or decrease the volume.
(on the system only) to adjust the hours and
minutes for the clock/timer functions.
Notes for remote control:
- First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example CD,
TUNER).
“ Then select the desired function (for
example H, H).
10
pg 001-020/M250/21-Eng 4 ^
4/16/02, 7:04 PM
3140 115 29261