Philips MCM25037 - Manual (Page 12)

CD/MP3-CD Operations
IMPORTANT!
The lens of the CD player should never be
touched.
Discs for playback
This system is able to play :
- All pre-recorded audio CDs
- All finalised audio CDR and audio
CDRW discs
- MP3-CDS (CD-ROMs with MP3 tracks)
# CD-ROM, CD-1, CDV, VCD, DVD or computer
CDs, however, are not possible.
Playing a disc
1 Select CD source.
2 Press OPEN*CLOSE A on the top of the
system to open the CD compartment
"CD OPEN” is displayed.
3 Insert a disc with the printed side facing up and
press OPEN*CLOSE ^ to close the CD door.
-♦ "REflOINQ" is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks and playing time are shown.
4 Press ► II to start playback.
To interrupt playback
• Press ►!!
-♦ The current track time flashes.
• To resume playback, press ► II again.
To stop playback
• Press ■.
Notes:
- Disc play will also stop when you select another
source or the disc has reached the end.
- For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
Text display
In CD mode
• Press DISPLAY repeatedly to see the following
information.
Track number and elapsed play time of
current track.
Remaining play time of current track.
Total number of tracks played and total
played-back time.
^ Total remaining number of tracks and total
remaining play time.
In MP3-CD mode
• Press DISPLAY repeatedly to select four
display modes : NumbenTrack, Album and ID3.
Number Album number track number and
elapsed play time.
Track Track name and elapsed play time.
Album Album name and elapsed play time.
ID-3 ID-3 tag scrolls once and elapsed play
time.
Selecting a different track
Press or ►PH (!◄ or N) repeatedly until
the desired track number appears in the display.
If playback is stopped, press Pll to start
playback.
12
n
pg 001-020/M250/21-Eng 4/16/02, 7:04 PM
3140115 29261
r