Installation locations, Avoid heat and cold extremes, Accessories – Philips 14L4521599 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Locations
Avoid Heat and Cold Extremes:
♦
Do not store or use the LCD Monitor in locations exposed to heat,
direct sunlight, or extreme cold.
♦
Avoid moving the LCD Monitor between locations with large
temperature differences. Choose a site falling within the following
temperature and humidity ranges.
Temperature: 5-35° C
Humidity: 20-80% RH
♦
Do not subject the LCD Monitor to severe vibration or high impact
conditions. Do not place the LCD Monitor inside a car trunk.
♦
Take care not to knock this product off the top of your desk or drop
it when operating or transporting it.
♦
Do not store or use the LCD Monitor in locations exposed to high
humidity or in a dusty environment. Also, do not allow water or
other liquids to spill on or into the LCD Monitor.
♦
Do not place the LCD Monitor near a television or radio receiver,
or other equipment radiating RF energy fields.
♦
If the rotating mechanism does not operate properly, wipe off the
rubber on the underside of the stand base. The tilt swivel stand of
the LCD Monitor is equipped with a rotating mechanism which may
not work properly if dust and other dirt adheres to the rubber on the
underside of the stand base, depending on the installation site. If
necessary, carefully remove all the dust and other dirt adhering to
the rubber.
Accessories
1. AC adapter
2. AC cord
3. Signal Cable
4. Audio Cable
5. Tilt Swivel Stand
(the main unit and stand are connected at shipment)
6. Operating Instructions