Audio, Audio function, Connection with computers and audio equipment – Philips 14L4521599 User Manual
Page 22: Headphone use, Volume, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Audio
Audio Function
•
The speakers allow you to enjoy music and other sounds through
connection to the sound output terminal of computers and audio
equipment.
Connection with Computers and Audio Equipment
•
Use the supplied mini plug cord to connect the display to the audio
sound output of computers and audio equipment.
Headphone Use
•
Connect the headphone to the headphone jack (mini jack).
Volume
•
Adjust the speaker and headphone volume with the volume control.
•
Turn the volume control to low before using the headphones, then
turn it up slowly to the optimum level.
Notes:
•
Enjoy the display at an appropriate volume, not too loud for your
ears and not disturbing to those around you. Be careful not to turn
up the display volume too high when listening without any break for
an extended period of time.
•
Lower the volume or stop use if you notice anything wrong with
your hearing.
•
Your ears can adapt to loud sounds if you listen to them without
any break. If you become used to the loud volume and raise it
even higher, it could adversely affect your hearing. Keep the
volume down, and be careful not to raise it too high.
•
When adjusting the volume, turn the volume to low, then turn it up
slowly to the optimum level.
•
After adjusting the volume to the appropriate level, use that level as
a guide to ensure that you do not turn it up too high.
•
Turn the volume control to low when you are not using the audio
function.
•
Do not turn the display power switch on or off if a signal is input in
the audio input connector of the display.
Caution;
Connection to headphones with remote controller functions
may not always be possible.
20