beautypg.com

Connections – Philips FB209W-17 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CONNECTIONS

m

3

Important!

Always switch off all your equipment before making

any connections!

To connect your wireless speaker system, refer to the picture

above.

The speaker connections on the appliance may be screw

connectors or click-fit connectors.

1

г

1

2

3

At the rear of the appliance you will find a colored or ©
terminal and a black or © terminal for each speaker.

Note: - After connecting all the speakers, do not forget to

adjust the relative sound level between them.

Front speakers (not included) and center speaker

Connect the colored speaker wire to the coloured or ©

terminal, and the black wire to the black or © terminal of the

appliance.

Surround speakers

Connect the active speakers to the power source with the
power cable provided. Switch on the active speaker with the
POWER switch.

Transmitter unit

Connect the SURR terminal of the transmitter with the
PRE OUT (SURROUND) terminal of the appliance using the
supplied cinch cable. Connect the AC/DC adapter supplied to

the 14 V socket of the transmitter. Then connect the AC/DC
adapter to the power source.

Note: - The SUB terminal of the transmitter is not used with

this set