ClearSounds CS2000M - Manual (Page 9)

9
TROUBLesHOOTING
probLem possibLe CAuse
red power light
is not on
- AC Adaptor is not plugged in
- AC plug is not plugged into the transmitter
- The audio cord is not plugged into the audio source
- There is no audio output from the audio source
no sound from
headphones
- The audio cord is not plugged into the audio source
- There is no audio output from the audio source
- The transmitter is not ON
- The headphones are not ON
- The headphones have no batteries
- The batteries are inserted in the headphones incorrectly
- The batteries are dead and need to be replaced
self-testing
of system
- Hook up the microphone to the transmitter and speak into the
microphone. You should hear your voice in the headphones
and you will confirm the unit is working
sound too low - Headphone volume control is too low
- Batteries are weak and need to be replaced
poor sound - Infrared sensor on headphone is not in line with the transmit-
ter
- Batteries are weak and need to be replaced
- Headphone volume control needs to be adjusted
static - Infrared sensor on headphones is not in line with the trans-
mitter
CS2000MOwner'sMan.indd 9 11/14/08 11:24:42 AM