Philips MIC4014SB-27 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2. Press the Mode button until “HI” appears in the LCD display. Then keep pressing the

Shutter button will display the following sequence:

Lo ^ HI ^ PU

3. Select the desired resolution format then press Mode button to confirm the change.

4.60 Image Quality

High Quality and Standard Quaiity

1. The camera is defaulted with the setting in ^ High Quality.

2. To set to Standard Quality 1- 9, press the “Mode” button until “ 3»appears in the

LCD. Press the “Shutter” Button once and the LCD will display ^ 9 .

3. Press the Mode button once to confirm the mode change. The ^ 9 standard

Quality is being selected.

Below is a table to show the maximum number of images can be taken at different
resolutions with different Image Quality:

Resolutions

Hiqh Quality

Standard Quality

HI (VGA 640

480)

70 imaqes

110 images

Lo (QVGA 320 x 240)

170 images

270 images

PU (1.3M bv interpolation)

22 imaqes

35 images

4.70 Frequency Selection- when using as a Web camera (Video mode) or

Indoor Image Capturing

50Hz/60Hz Frequency mode

Select 50Hz or 60Hz according to the power frequency set in your living country to

avoid flickering under video mode or indoor image capturing.

The 60Hz frequency is set as a default. To select 50Hz frequency, press the Mode

button until “60” is displayed on the LCD, then press the Shutter button to confirm
selecting 50Hz.

5.0

INSTALLING THE SOFTWARE AND UPLOADING IMAGES TO PC

Windows 98 Users

To upload the images to PC, install the camera driver first. After this has been done, the
stored images in the camera can be moved to the PC.

Note: Do NOT connect camera to USB port prior to installing software and drivers.

1. Insert the CD into the CD-Rom drive. The installation window automatically appears.

Ensure the camera is not connected to your computer.

2. Close out of all programs and disable any background applications such as Anti-Virus

software.

3. If the installation window does not appear, click the Start button on the desktop and

choose Run.

4. When the Run dialog box appears, click the Browse button and navigate to your CD-

ROM drive directory. Double-click the Setup.exe icon to begin the installation process.

5. An Install shield Wizard will be appeared. Click the “Next" button.

After the installation is completed, click the “Finish” button and restart the computer.