beautypg.com

Philips 27PT541S User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

U

sing

the

AVI

in

or

AV2

in

(I

nput

) J

acks

' i 'he TV’s audio ¡video input jacks are for

A.

direct picture and sound connections

between the TV and a VCR (or similar device)
that has audio ¡video output jacks. Both the

AVI and AV2 Input Jack connections are shown

on this page, but either one can be connected
alone. Follow the easy steps below to connect
your accessory device to the AVI and AV2 in

Jacks located on the back of the TV.

Connect the VIDEO (yellow) cable to
the VIDEO AVI in (or AV2 in) jack on
the back of the TV.

2

Connect the AUDIO (red and white)

cables to the AUDIO (left and right)
AVI in (or AV2 in) jacks on the rear of
the TV.

3

Connect the VIDEO (yellow) cable to

the VIDEO OUT jack on the back of
the VCR (either one or two) or acces­

sory device being used.

4

Connect the AUDIO (red and white)

cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR

(either one or two) or accessory device
being used.

S

TIirn the VCR (either one or two) or

accessory device and the TV ON.

6

Press the AV button on the remote

control to select the AVI channel for
accessory device number one, or the
AV2 channel for accessory devic e
number two. AVI or AV2 will appear

in the upper left comer on the TV
screen depending on the channel
choosen.

7

With either of the VCRs (or accessory

devices) ON and a prerecorded tape
(CD, DVD, etc.) inserted, press the
PLAY button to view the tape on the
television.

NOTE: Repeatedly pressing the AV button on the remote control will toggle the
picture source from the current channel, then the AVI channel (or CVI channel),
then the AV2 channel, then the S-Video (SVHS) channel, then the Front channel
(side inputs), then back to the current channel being watched.

C

heck

I

t

O

ut

Repeatedly pressing the AV button on the
remote control will toggle the picture source
from the current channel, then AVI (or CVI),
AV2, SVHS, Front, or current channel.

Note: The AudioA^ideo cables needed for
this connection are not supplied with your
TV. Please contact your dealer or Philips at
800-531-0039 for information about purchas­

ing the needed cables.

BACK OF TV