Philips 27PT541S - Manual (Page 11)

U
sing the
CVI (C
omponent
V
ideo
I
nput
) J
acks
C omponent Video inputs provide for the
highest possible color and picture resolu­
tion in the playback of digital signal source
material, such as with DVD players. The
color difference signals (Pb, Pr) and the lumi­
nance (Y) signal are connected and received
separately, which allows for improved color
bandwidth information (not possible when
using composite video or S-Video connec­
tions).
■ Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD play­
er (or similar device) to the (Y, Pb, Pr)
in(put) Jacks on the TV. When using
the Component Video Inputs, it is best
not to connect a signal to the AVI in
Video Jack.
2 Connect the red and white AUDIO
CABLES to the Audio (left and right)
output jacks on the rear of the accesso­
ry device to the Audio (L and R) AVI
in Input Jacks on the TV.
3 T\irn the TV and the DVD (or digital
accessory device) ON.
4 Press the AV button to scroll the
available channels until CVI appears in
the upper left comer of the TV screen.
5 Insert a DVD disc into the DVD player
and press the PLAY ^ button on the
DVD Player.
H elpful H int
The description for the component video
connectors may differ depending on the
DVD player or accessory digital source
equipment used (for example, Y, Pb, Pr; Y,
B-Y, R-Y; Y, Cr, Cb). Although abbrevia­
tions and terms may vary, the letters b and r
stand for the blue and red color component
signal connectors, and Y indicates the lumi­
nance signal. Refer to your DVD or digital
accessory owner’s manual for definitions
and connection details.
El C heck I t O ut
Repeatedly pressing the AV button on the
remote control will toggle the picture source
from the current channel, then AVI (or CVI),
AV2, SVHS, Front, or currect channel.
Note; The Component Video and Audio
cables needed for this connection are not
supplied with your TV. Please contact your
dealer or Philips at 800-531-0039 for infor­
mation about purchasing the needed cables.
The CVI connection will be dominate over the AVI in Video Input.
When a Component Video E)evice is connected as described, it is best
not to have a video signal connected to the AVI in Video Input jack.
BACK OF TV
® (D @
© ® (D
® ® ®
SLEtr o ® o
EQUIPPED WITH CONPONENT
VIDEO OUTPUTS.
11