Philips CDC751-17 - Manual (Page 9)

PLAYBACK
SELECTING ANOTHER TRACK DURING PLAY
(!◄◄ ►H)
SCANNING CDs (SCAN)
• Press 13 or 13 (less than 0.5 secontfs) until the
desired track number appears under TRACK.
TR^CK TRACK T ime
P ! P
n
□ 1 P u
- The music stops and a moment later the selected track
begins to play.
URDfJG TRREH Lights up when you select a non-existent
track number.
SELECTING ANOTHER CD DURING PLAY (DISC SELECT)
• Key in the desired CD number.
- The music stops and a moment later the selected CD begins
to play.
IJRDNB DISC lights up if you select a non-existent number.
You can also select the number by using the DISC button 7 on
the remote control (CDC 751 only).
SEARCHING FOR A PASSAGE DURING PLAY (P^ ►►!)
• Hold 13 down to search backwards to the beginning.
• Hold 13 down to search forwards to the end.
The searching speed is determined by how long a key is
pressed:
- the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.
If you reach the end of the last track and release ►►!, play will
resume a few seconds before the end of the CD.
STARTING WITH A PARTICULAR CD (DISC SELECT)
• Key in the required CD number.
- If the CD compartment was open, it will now close.
- Play starts from the selected CD.
UROfJG IJI5G lights up if you select a non-existent number.
You can also select the number by using the DISC button 7 on
the remote contro (CDC 751 only).
STARTING WITH A PARTICULAR TRACK
(DISC SELECT, !◄◄ and PLAY>-) * •
• First select the number of the required CD using DISC
SELECT 2 or DISC 7 on the remote control (CDC 751 only).
- If the CD compartment was open, it will now close.
• Then select the (track) number by using or 13
(press less than 0.5 seconds).
• Press PLAY ► 9.
- Play starts from the selected track.
URONG TRRCH Lights up when you select a non-existent
track number.
tJPOfJG DISC lights up if you select a non-existent number.
All CDs:
• Press SCAN 3b before or during play.
- If the CD compartment was open, it will now close.
- SCRiJ lights up and the first 10 seconds of each track are
played in turn (starting from the current track). 10 seconds
are counted down each time under REM(aining) TRACK
TIME.
TRACK REJ.1 TRACK Tl’/E
LJ n. n
P
1 u- U □
.c
"o)
c
u
• When the player reaches a track which you wish to hear in
full, press SCAN again or PLAY ► 9.
One CD:
• The CD-player should be in position STOP
• Select the number of the required CD using DISC SELECT 2
or DISC 7 (on the remote control - CDC 751 onl^.
• Press SCAN 3b, within the time the CD number is flashing
on the display.
- Now only the first 10 seconds of each track on the selected
CD will be played in turn.
PLAYING IN RANDOM ORDER (SHUFFLE)_____________
All CDs:
• Press SHUFFLE 7before or during play.
- If the CD compartment was open, it will now close.
- SHUFFLE lights up and all the tracks are now played in a
random order.
- If you press 13, you will select any one of the following
tracks.
• Press SHUFFLE again if you wish to return to normal play.
NOTE!
If, during play, you open the CD compartment to change CDs
(see ‘NORMAL PLAYBACK') then playback in random order
will be cancelled. Playback will stop as soon as the last track of
the current CD has been played (in normal order).
One CD:
• The CD-player should be in position STOP.
• Select the number of the required CD using DISC SELECT 2
or DISC 7 (on the remote control - CDC 751 onl^.
• Press SHUFFLE 7, within the time the CD number is
flashing on the display.
- DISC and SHUFFLE light up; the tracks of the selected CD
will now be played in a random order. TRWXTRACK TIS
<£E> —} <• cr n
1
s-v.-rae I-
3
u
- If you press 13, you will select any one of the following
tracks.
If you press REPEAT 12 twice, the tracks will be repeated in a
different order each time, although the first track will always
be the same.
- When all tracks of the selected CD have been played,
playback stops.
• Press SHUFFLE again if you wish to return to normal play.