Philips CDC751-17 - Manual (Page 10)

PLAYBACK
m
3
(O,
w‘
3"
CALLING UP INFORMATION OIM THE DISPLAY (TIME)
In STOP mode:
Text display
- After loading the CDs and closing the CD compartment, the
display shows the number of the CD to be played (= default
display in STOP mode).
REPEATING PLAY (REPEAT)
(íTi TI I Cl r" p
JJ I J L_ C_
During play:
7.Time display
- When you start play (from STOP mode), the display shows
the elapsed playing time of the current track (= default
display in PLAY mode).
TP*;-' T'.'i
• Press TIME 5e whenever you want to know the remaining
playing time of the current track (REM TRACK TIME).
/VHN ^
B-
I E
Press TIME again if you wish to know the remaining playing
time of the entire CD (TOTAL REM TIME).
q
r-*
T'':
P. ( P
C- ( c
A/ofe - TOTAL REM(aining) TIME indication is not available in
SHUFFLE mode.
2.Text display
• If you press TIME again, you will switch to text display; the
display shows the number of the current CD.
I]
I5 l
E
• If you wish to know the total playing time of the entire CD you
must go back to STOP mode first and then press TIME.
- The display now shows the number of tracks and the total
playing time of the current CD (TOTAL TIME).
ip-n
Repeating a track:
• Press REPEAT 72 before or during playback of the CD.
- REPEAT 1 lights up; the track will now be repeated
continuously.
1
1
• Press REPEAT three times to stop the track being repeated.
Repeating a CD:
• Press REPEAT 72 twice before or during playback of the CD.
- REPEAT DISC lights up; the CD will now be repeated
continuously.
E U B
• Press REPEAT twice to stop the CD being repeated.
Repeating all CDs:
• Press REPEAT 72 three times before or during playback..
- REPEAT lights up; all CDs will now be repeated continuously
T ps :: n
5
1 ^ 3 3
• Press REPEAT again to stop the CDs being repeated.
NOTES!
- Repeating a track is not possible in SHUFFLE mode or when
a programme is being stored.
- When a programme has been stored (for one or more CDs),
then only the programme will be repeated.
SEARCHING THE LOUDEST PASSAGE (PEAK SEARCH)
• In STOP mode, press PEAK SEARCH 3d.
- SELECT mSE lights up and PEAK starts flashing.
• Select the number of the required CD using DISC SELECT 2
or DISC 7 (on the remote control - CDC 751 only).
- The CD will now be scanned for the loudest passage (the
peak).
- The display shows the track being scanned and its elapsed
playing time.
Ti=:c,
^ 3 5
- When the loudest passage has been found it will be
repeated continuously (from 2 seconds before the peak until
2 seconds after the peak) and PEAK lights up.
• You can now adjust your recording device.
• You can stop the scan by pressing STOP ■ 8: if you press
PLAY ► 9, the CD will be played from the beginning.
NOTEI
- When searching for the loudest passage in a programme
(from one or more CDs) there is no need to enter the CD
number(s).
- If you wish to record tracks from different CDs you have to
repeat peak search for each CD.
- You can interrupt PEAK SEARCH by pressing STOP ■ 8.
10