Philips CDC751-17 - Manual (Page 13)

ADDITIONAL INFORMATION
STAND BY
• When the changer is incorporated in a HiFi system, the
changer can be set to STAND BY with the STAND BY button
on the remote control of the system.
The changer will go to STAND BY mode automatically if the
whole system is set to STAND BY mode.
- If the CD compartment was open, it will now close.
- Any programme present will be erased.
• Press any of the following buttons to cancel the STAND BY
mode: DISC SELECT 2, PLAY ► 9, STOP ■ 8. SCAN 3b.
SHUFFLE 7, EDIT 3c. OPEN/CLOSE 14.]«
73or
PROGRAM 3a.
MAINTENANCE
The CDs
• Never write on the printed side of a CD.
• Do not attach any stickers to the CD.
• Keep the shiny surface of the disc clean.
Use a soft lint-free cloth and always wipe
the disc in a straight line from centre to
edge.
• Never use cleaning agents for
conventional records.
• Detergents or abrasive cleaning agents
should not be used either.
The changer
• A chamois leather slightly moistened with water is sufficient
for cleaning the changer.
• Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives.
TECHNICAL DATA________________________________
Typical Audio Performance
Frequency range;.................................................. 2 Hz - 20 kHz
Amplitude linearity:............................... 0.3 dB {20 Hz - 20 kHz)
Phase linearity:.....................................4° dB (20 Hz - 20 kHz)
Dynamic range:.................................................. >90 dB (1 kHz)
Signal-to-noise ratio:.......................................... >90 dB (1 kHz)
Channel separation:........................................... >90 dB (1 kHz)
Total harmonic distortion:.................................. 0,003% (1 kHz)
Audio output level:........................................................... 2
Impedance PHONES socket (CDC 751 only): ..30-600 ohms
Power supply
Mains voltage and frequency:
see the type plate on the rear of the changer
Power consumption;....................................................... <10 W
Safety requirements;....................................................... lEC 65
Cabinet
Material/finish; ...metal and polystyrene with decorative trim
Dimensions (w x h x d):............................ 435 x 106 x 380 mm
Weight;.................................................................... 7 kg approx.
Subject to modification
This Compact Disc changer complies with radio interf­
erence requirements as laid down in EC regulations.
ro
c
U1
RECYCLING
Please observe the local regulations regarding the disposal of
packing materials, exhausted batteries and old equipment.
1. All redundant packaging material has been omitted. We
have done our utmost to make the packaging easy
separable into three mono-materials:
- cardboard (box)
- expandable polystyrene (buffer)
- polyethylene (bags, protective foam sheet)
2. Your set consists of materials which can be recycled if dis­
assembled by a specialized company.
3. Do not dispose of exhausted batteries with your household
waste.
4. Note: Switching off the standby mode overnight will save
energy.
13