Clarion RMX465D - Manual (Page 12)

14
RMX465D
MD Operations
Selecting a track
● Track-up
1. Press the right side of SRCH button # to
move ahead to the beginning of the next track.
2. Each time you press the right side of SRCH
button # , the track advances ahead to the
beginning of the next track.
● Track-down
1. Press the left side of SRCH button # to move
back to the beginning of the current track.
2. Press the left side of SRCH button # twice
to move to the beginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
Press and hold the right side of SRCH button #
for 1 second or longer.
● Fast-backward
Press and hold the left side of SRCH button #
for 1 second or longer.
Top function
The top function resets the MD player to the first
track of the disc. Press TOP button
@ to play
the first track (track No. 1) on the disc.
Scan play
The scan play locates and plays the first 10
seconds of each track on a disc automatically. This
function continues on the disc until it is canceled.
∗
The scan play is useful when you want to select a
desired track.
1. Press SCN button 9 to start track scanning.
“SCN” lights in the display.
2. To cancel the scan play, press SCN button 9
again. “SCN” goes off from the display and
the current track continues to play.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press RPT button 8 . “RPT” lights in the
display and the current track is repeated.
2. To cancel the repeat play, press RPT button
8 again. “RPT” goes off from the display and
normal play resumes.
Random play
The random play selects and plays individual tracks
on a disc in no particular order. This function
continues automatically until it is canceled.
1. Press RDM button 7 . “RDM” lights in the
display, an individual track is selected
randomly and play begins.
2. To cancel the random play, press RDM button
7 again. “RDM” goes off and normal play
resumes.
Setting the clock
1. Press the DISP button 5 to toggle the display
to the clock mode.
2. Press and hold the DISP button 5 for 1
second or longer.
3. Select SRCH left or right to adjust the time
using the
α
-selector # .
● Adjusting minutes
Each time you use the SRCH right button # , the
minutes increment up by one digit (0 to 59).
● Adjusting hours
Each time you use the SRCH right button # , the
hours increment up by one digit (1 AM to 12 PM).
Repeat press left and hold the
α
-selector # to
increment the hours as they count up from AM to
PM, stopping on the correct hour.
∗
The clock only displays time in a 12-hour format.
There is no way to toggle the clock to a 24-hour
format.
4. Press the DISP button 5 to set the clock into
memory. This also resets the seconds counter
to zero.
Note:
• The clock can only be set by turning power on to
the unit and switching to the clock display mode.
You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery, the clock must be reset. While setting the
clock, if another button or operation is selected,
the clock set mode is canceled.