Radio operations, Fm reception, Changing the reception area – Clarion RMX465D User Manual

Page 10: Listening to the radio, Tuning, Seek tuning, Manual tuning, Recalling a preset station

RMX465D

Radio Operations

FM reception

For enhanced FM performance the

tuner includes signal actuated

stereo control and Multipath noise reduction
circuits.

Changing the reception area

This unit is initially set to USA frequency intervals
of 10kHz for AM and 200kHz for FM. When using it
outside the USA, the frequency reception range
can be switched to the intervals below.

●

Setting the reception area

1. Press BND button

and select the desired

radio band (FM or AM).

2. While pressing BND button

, each time you

press and hold the SRCH left button

for 2

second or longer, the reception area switches
from inside the U.S.A. Also, while pressing
BND button

, press and hold the SRCH right

button

for 2 second or longer, the reception

area switches from outside U.S.A.

∗

Any station preset memories are lost when the

reception area is changed.

Listening to the radio

1. Press FNC button

and select the radio

mode.

2. Press BND button

and select the radio

band. Each time the button is pressed, the
radio reception band changes in the following
order:

FM1

➜

FM2

➜

FM3

➜

FM1...

3. Press the right or left side of SRCH Left or

Right button

to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.

Seek tuning

1. Press BND button

and select the desired

band (FM or AM).

∗

If “MANU” is lit in the display, press and hold
BND button

for 1 second or longer. “MANU”

in the display goes off and seek tuning is now
available.

2. Press the right or left side of SRCH Left or

Right button

to automatically seek a station.

When the SRCH Left or Right button

pressed, the station is sought in the direction
of higher frequencies; if the left side of SRCH

button

is pressed, the station is sought in

the direction of lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press BND button

and select the desired

band (FM or AM).

∗

If “MANU” is not lit in the display, press and
hold BND button

for 1 second or longer.

“MANU” lights in the display and manual tuning
is now available.

2. Tune into a station.

●

Quick tuning:

Press and hold the right or left side of SRCH
button

for 1 second or longer to tune in a

station.

●

Step tuning:

Press the right or left side of SRCH button

to manually tune in a station.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
preset button recalls the stored radio frequency
automatically.

1. Press BND button

and select the desired

band (FM or AM).

2. Press the corresponding Preset button

recall the stored station.

∗

Press and hold one of the Preset buttons

for 2 seconds or longer to store that station into
preset memory.

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

2. Press and hold one of Preset buttons

for 2

seconds or longer to store the current station
into preset memory.