Canon 1650 User Manual

Page 16

Print Server Installation

AXIS 1650 User’s Manual

Set a Static IP Address using ARP in Windows 98/Me/2000/XP/2003

1. Open a Command Prompt and type:

Example:

2. If the host returns

Reply from 192.168.3.191 ...

or a similar message, the IP address

has been set successfully.
If the host returns Request time out... you need to reboot the print server and perform

steps 1-2 above again. Rebooting the print server is done by disconnecting and then
re-connecting the print server’s power supply.

3. Access the print server’s Web pages ( - See page 37), select

Admin | Network Settings |

Detailed View | TCP/IP and define the Default Router and Subnet Mask. Make sure DHCP,

BOOTP and RARP are disabled.

You have now set the IP address of the print server. Continue with Windows Installation, on

Note:

arp -s
ping -l 479

arp -s 192.168.3.191 00-40-8c-18-1c-f0
ping -l 479 192.168.3.191

When you execute the ping command for the first time, you will experience a significantly
longer response time than usual.