Canon A85 - Manual (Page 52)

50
Shooting – The Basics
z You can also press the shutter button directly
to shoot without pressing the SET button.
3
Shoot the first image.
z The exposure and white balance settings are
set and locked with the first image.
4
Compose and
shoot the second
image so that it
overlaps the first.
z Minor discrepancies in
the overlap can be
corrected with the
software.
z An image can be retaken. Press or to
return to that frame.
5
Use the same procedures to
shoot the remaining frames.
z A maximum of 26 images can be recorded.
Sequence
6
Press the SET button after the
last shot.
z A custom white balance setting (p. 82)
cannot be set in
mode. To use a
custom white balance setting, first set it in
another Shooting mode.
z The settings in place for the first image
are locked in and cannot be changed for
subsequent shots.
z A TV cannot be used as the monitor for
shooting in this mode.
See page 159 for settings that can be
changed in this mode.
149_CEL_CUG.book Page 50 Friday, April 30, 2004 3:13 PM