Citizen Systems CLP-621 - Manual (Page 36)

2
Printer Operation
36
Menu Setting Table
Page Setup Menu - allows you to change settings related to the media or print quality.
System Setup Menu - allows you to change settings for the printer hardware and basic control systems.
After Print Menu - changes how the printer reacts after the label has been printed.
Interfaces - changes interface parameters such as baud rate.
Top Menu Sub Menu Default Menu Remarks
Page Setup Print Speed 4 IPS 2 to 4 IPS Printing speed setting
Print Darkness 10 00 to 30 Print darkness setting (printhead
temperature)
Darkness adjust 0 -10 to 10 Darkness command adjustment
Print method Thermal transfer Thermal transfer Selecting thermal transfer (ribbon)
Direct thermal /direct thermal media
Continuous Media 4.00 IN 0.25 to 32.00 IN Setting default length of continuous
Length 101.6mm 6.40 to 812.8mm media, if selected. ; the lower line is in metric
mode.
Vertical Position 0.00 IN -1.00 to 1.00 IN Print start position adjustment
0.0mm -25.4 to 25.4mm
Horizontal Shift 0.00 IN -1.00 to 1.00 IN Horizontal printing location adjustment
0.0mm -25.4 to 25.4mm
Media Sensor See Through See Through Label sensor selection
Reflect
None
Small Media OFF ON Setting for small labels
Adjustment OFF
Small Media 1.00 IN 0.25 to 1.00 IN Setting length of small label media
Length 25.4mm 6.40 to 25.4mm
System Setup Sensor Level 1.5V 0.0V to 3.3V Setting the threshold of the sensor
Buzzer Select ON ON Setting buzzer sounding conditions
OFF
Metric/Inch Inch Inch Setting the units used
mm
Max Media Length 10.00 IN 1.00 to 50.00 IN Setting the maximum label length
254.0mm 25.4 to 1270.0mm
Settings Lock Off On/Off When on, prevents software commands from
changing the values set by the VuePrint menu
Keyboard Lock Off On/Off Prevents the control panel from affecting
the printer's conrfiguration. (User "lock-out")
Control Code STD STD/ALT Selects between the Standard STX control
code or the "Alternative" code. Sometimes
called "AS400 mode".
Emulation Select DM4 DMI Datamax compatibility selection
DM4 DMI DataMax IClass
DPP DM4 DataMax 400 like
DPP DataMax Prodigy Plus
After Print AutoConfigure On On Optional auto configure
Off On .... Auto configure effective.
If a peeler unit or auto-cutter is
installed, each mode is automatically
set regardless of the “function select”
setting.
Menu Setting
Mode Settings