For firmware update (for technical support only) – Cable Electronics HSW44C User Manual
Page 9
8
SW Main
for firmware update (for technical support only)
DIP Switch Position
Pin#1
Pin#2
Pin#3
Pin#4
Normal Operation Mode
6
OFF
[ ]
OFF
[ ]
ON
[ ]
OFF
[ ]
Firmware Update Mode
7
ON
[ ]
ON
[ ]
OFF
[ ]
OFF
[ ]
Note
6
Factory default for SW Main: Pin#1-OFF
[ ]
, Pin#2-OFF
[ ]
, Pin#3-ON
[ ]
, Pin#4-OFF
[ ]
.
PLEASE MAINTAIN THIS SETTING AT ANYTIME FOR REGULAR USE!
7
Sequence for firmware update
[1]. Power off the HSW44C.
[2]. Set the DIP switch position to Firmware Update Mode.
[3]. Power on the HSW44C.
[4]. Power off the HSW44C.
[5]. Set the DIP switch position to Normal Operation Mode.
[6]. Power on the HSW44C.