Hsmr – Cable Electronics HSW44C User Manual
Page 7
6
HSMR
1.
Source LED: Indicate input source
2. IN
: Push button for switching input source channel in sequential order
3. EQ
: Adjust the 8-level equalization control for HDMI signals. 0 – 7 = strongest – weakest. It is
recommended to switch from 7 to 0 to find the optimal visual experience.
4. HDMI Out
: Connect to HDTV with a HDMI cable
5. IR
: Plug in IR receiver cable
6
. 5V DC power jack [optional
*
]
7.
RJ-45 Input: TMDS channel [connect to TMDS channel of OUT1 to OUT4 on HSW44C]
8.
RJ-45 Input: DDC channel [connect to DDC channel of OUT1 to OUT4 on HSW44C]
*
The HSMR has been tested extensively and found that it doesn’t require external power supply.
If in rare situation you find it cannot work with the HSW44C, please use any +5V power
adapter to plug in the power jack and see if it can work. If not, please contact your technical
support for further service.
1111
2222
3333
4444
5555
6666
8888
7777