Philips PR1909B - Manual (Page 6)

O n -S creen F eatures (C ont ’ d )
V olume B ar
V olume B ar
T he Volume Bar displays the
TV’s volume level on the TV
screen. When the Volume Bar is
set to ON, it will appear when
you adjust the volume.
_CBEGINJ_
Press the MENU
button, then press the
CH(annel) A/T buttons to
select VOLUME BAR.
TO ADJUST PRESS / ►
> VOLUME BAR 1 OFF 1
REMINDER
CHANNEL
SMARTLOCK
REVIEW
SETUP
y
Press the VOL(ume)
buttons so that ON or
OFF appears beside VOL­
UME BAR.
Press the STATUS/EXIT
button.
<î>
o o
■O CP C3
CD CD CD
S leep T imer
S leep T imer
I—dmlH)-
,
H ave you ever fallen asleep
in front of the TV, only to
have it wake you up at 2 a.m.
with a test pattern screeching
in your ears? Well, your TV can
save you all that trouble by
automatically turning itself off
Press the SLEEP button
repeatedly to pick the
amount of time (30 minutes to
120 minutes) before the TV
turns itself off.The length of
time will appear on the screen.
One minute before the TV
shuts itself off, the seconds will
count down on the screen.
GOOD NIGHT appears on the
TV screen 10 seconds before
the TV shuts itself off.
f o 51
$TAnj&EKIl »AITt
CD CD CD
n CD GD
m CD Q
m (D fP
CDO
<0>
S mart
H elp
To see how S
many minutes remain
before the TV shuts
itself off, press the
SLEEP button once.
Try it out.
Press the
VOL(ume) ►/◄
buttons. The VOL­
UME BAR should
appear on the
screen.
To avoid delays in
Closed Captioning
when you adjust or
mute the volume,
set the VOLUME
BAR to OFF.
To cancel a SLEEP
TIMER setting, press
the SLEEP button
repeatedly until SLEEP
0 MIN appears on the
screen.
S mart L ock
S mart L ock
I—CBBQIN>
S martLock enables parents to
prevent their children from
watching inappropriate material
on TV. SmartLock reads the rat­
ings for programming (except
for news and sports programs,
unedited movies on premium
cable channels, and Emergency
Broadcast System signals), then
denies access to programming if
the program’s rating meets or
exceeds the limitations you
select To block specific ratings,
follow these steps.
Press the MENU but­
ton, then press the
CH(annel) A/T buttons to
select SMARTLOCK.
Then, press the VOL(ume)
button.
> SMARTLOCK 1 PRESS ► 1
REVIEW
SETUP
EXIT
BRIGHTNESS
PICTURE
y
<é>,
Press the CH(annel)
A/T buttons to select
Movie Ratings or
Parental Guidelines.
Then, press the
VOL(ume) ^ button.
/ BLOCK X
> Movie Ratings
Parental Guidelines
SELECT AT CHOOSE ►
TO END PRESS EXIT
RATING EXPLANATIONS
• V-Violence • TV-Y7 - Appropriate for chil-
* S-Sexual situations dren seven and older.
• L-Language •TV-G - General Audience
• D-lnappropriate dialogue • TV-PG - Parental Guidance
• FV-FantasyViolence may suggested.
frighten children under • TV-14 - Unsuitable for chil-
seven;TV-Y7 category only. dren under 14.
Some cartoons may have • TV-MA - Mature audience
this rating.
• TV-Y - Appropriate for all
children.
only.
A ccess C ode
"b change the access code,
follow these steps.
CBEGINJ
,
Press the MENU but­
ton, then press the
CH(annel) A/T buttons to
select SMARTLOCICThen,
press theVOL(ume) ► but­
ton.
> SMARTLOCK 1 PRESS ► 1
REVIEW
SETUP
EXIT
BRIGHTNESS
PICTURE
y
Use the Number but­
tons to enter your access
code. The default code is 0711.
If you have not set up your per­
sonal access code, you should
use 0711.
X X
Enter Your Access Code
Press the CH(annel)
A/T buttons to select
BLOCK.Then, press the
VOL(ume) ► button.
SMARTLOCK
> BLOCK
CHANGE CODE
SELECT AT CHOOSE ^
TO END PRESS EXIT
Press the CH(annel) A/T buttons to select the rating
you want to block.Then, press the VOL(ume) ► button so
that ON appears beside the rating.
For example, if you set PG to ON, you may not view PG program­
ming because the block is on. Programs with a PG or higher rating will
be blocked.
MOVIE RATINGS
• G
PG
PG-13
R
NC-17
X
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
SELECT A T CHOOSE.
TO END PRESS EXIT
PARENTAL GUIDELINES
> TV-Y [OFF]
TV-Y7 >
[OFF] TV-G
TV-FG
TV-14
>
TV-MA >
SELECT A T CHOOSE I
TO END PRESS EXIT
More specific ratings are available forTV-Y7,TV-PG,TV-l4,andTV-
MA.When you press theVOL(ume) ► button to turn ONTV-Y7,
TV-PG,TV-I4 or TV-MA, additional ratings will appear. Press the
CH(annel) A/T buttons to select a specific rating.Then,
press theVOL(ume)
^ button so that ON appears beside
the rating. If you select the rating category and turn it on or off,
the specific ratings will turn on or off automatically. But, you can
always turn specific ratings on or off by selecting them individually.
TV-PG
> TV-PG [OFF]
D [OFF]
L [OFF]
S [OFF]
V [OFF]
SELECT A T CHOOSE ►
TO END PRESS EXIT
Press the STATUS/EXIT button.
1 Press the Number buttons
to enter your old access code. If
you have never set up your person­
al access code, use 0711.
<$>
Press the CH(annel) A/T
buttons to select CHANGE
CODE. Then, press the
VOL(ume) ^ button.
SMARTLOCK
BLOCK
> CHANGE CODE
SELECT AT CHOOSE ►
TO END PRESS EXIT
Use the Number buttons to
enter your desired access code in
the New Code space.Then, enter
the same code in the Confirm
Code space.
Your new access code should be
recorded.You will return to the
SMARTLOCK menu.
New Code
Confirm Code
Press the STATUS/EXIT but­
ton.
To check the
SmartLock settings,
press the MENU but­
ton, then press the
CH(annel) A/T but­
tons to select REVIEW.
Press theVOL(ume) ►
button so that the
SmartLock settings
appear. Ratings that are
blocked will appear on
the screen. An “X” will
appear if a specific rat­
ing is blocked, such asV
for Violence in theTV-
14 category.
If the “Incorrect Access
Code...” message
appears after step 2,
enter the correct
access code. In order to
protect the privacy of
the access code, an X
will appear on the
screen instead of the
number you enter.
A “CHANNEL XX
BLOCKED...” message
will appear when some­
one tries to access the
blocked programming. If
you want to view this
programming, enter
your access code.The
channel will remain
blocked until you enter
the correct code. If you
do not know the code,
you will have to select
another channel.When
you turn off the TV
once, the programming
is blocked again.
You cannot
use the default code
after you set up
your personal access
code.
To restore 0711 as
your personal access
code, unplug the
TV’s power cord for
10 seconds, then
plug it in again.
- 6 -