OmniSistem OnyxPro 75 - Manual (Page 15)

240-25
5
9 12 Prism & Prism Rotation No Function
Prism Rotation Forward (Slow to Fast)
Prism Rotation Stop
Prism Rotation Reverse (Slow to Fast)
0-3
4-127
128-13
1
132-25
5
10 13 Focus Focus In to Focus Out 0-255
11 14 Control Normal
Reset All
Reset Pan & Tilt
Reset Color
Reset Gobos
No Function
Reset Others
Display Off
Display On
No Function
Hibernate
No Function 0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-63
64-71
72-87
88-95
96-255
Control Board
The Control Board offers several features. You can simply set the starting address, run the pre­programmed
program, or perform a reset.
Main Menu
Browse through the menu by pressing the Mode, Down, Up, and Enter keys. Press Enter in order to select the
desired menu. You can change the selection by pressing the Up and Down buttons. Press Enter in order to
confirm selection, then exit back to the main menu to save changes. The functions provided are described in the
following sections.
Bold Selection Values = Default Setting
MENU SUBMENU SELECTION FUNCTION
Mode Addr XXX DMX Address Setting
Slav Slav Choose Slave Mode
Sequ Alon/Mast Choose Sequence
Mode
Sund Alon/Mast Choose Sound Mode
Lamp Temp 80~139°C, 90°C Set internal
temperature to shut the
15 of 18