OmniSistem OnyxPro 75 User Manual
Page 12
Note:
After switching on, the device will automatically detect whether DMX512 data is received or not. If there
is no data received at the DMX input, the display will flash.
This situation can occur if:
●
the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
●
the controller is switched off or defective, if the cable or connector is defective or the signal wires
are swapped in the input connector.
Note:
It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
DMX Protocol
St
Ex Name
Function
DMX
1
1
Pan
Pan Coarse
0-255
2
Pan Fine
Pan Fine
0-255
2
3
Tilt
Tilt Coarse
0-255
4
Tilt Fine
Tilt Fine
0-255
3
5
Movement Speed
Fast to Slow
0-255
6
Movement Function
Normal
Movement with Blackout
No Function
0-15
16-31
32-255
4
7
Shutter
Shutter Closed
Shutter Open
Strobe Effect (Slow to Fast)
Shutter Open
Pulse Effect in Sequences
Shutter Open
Random Strobe Effect (Slow to Fast)
Shutter Open
0-31
32-63
64-95
96-127
128-15
9
160-19
1
192-22
3
224-25
5
5
8
Dimmer
Dimmer (Closed to Open)
0-255
6
9
Color
Indexed:
Open
Color 01 - White Red
Color 02 - Red
Color 03 - Red/Blue
Color 04 - Blue
Color 05 - Blue/Green
Color 06 - Green
0-2
3-5
6-8
9-11
12-14
15-17
18-20
12 of 18