OmniSistem OnyxPro 101 - Manual (Page 17)

Pulse Closing w/ Reverse Blackout
No Function 64-95
96-255
25 32 Iris Indexed:
Max Diameter to Min Diameter
Pulse Opening & Pulse Closing:
Pulse (Slow to Fast)
0-255
0-255
16 18 Iris Indexed
Pulse Opening w/ Forward Blackout
Pulse Opening w/ Reverse Blackout
Pulse Closing w/ Forward Blackout
Pulse Closing w/ Reverse Blackout 0-191
192-20
7
208-22
3
224-23
9
240-25
5
26 33 17 18 Control Normal
Reset All
Reset Pan & Tilt
No Function
Reset Gobo
No Function
Reset Others
Display Off
Display On
No Function
Hibernation
No Function 0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-63
64-71
72-87
88-95
96-255
Control Board
The Control Board offers several features. You can simply set the starting address, run the pre­programmed
program, or perform a reset.
Main Menu
The main menu is accessed by pressing Enter until the display is lit. Browse through the menu by pressing the
arrow buttons (up, down, left, right). Press Enter in order to select the desired menu. You can change the
selection by pressing the arrow buttons. Press Enter in order to confirm selection, then exit back to the main
menu to save changes. The functions provided are described in the following sections.
① = Basic Reload ② = Program Reload ③ = Private Reload Default settings are listed in bold.
MENU SUBMENU SELECTION FUNCTION
Connect DMX Address ① XXX DMX Address Setting
Light Max Temperature ① 80~139°C, 120°C
176~282°F, 248°F Set internal
temperature to shut the
17 of 27