Canon 2010F - Manual (Page 18)

Flow of Copy Operations 1-9
Introduction to Cop
ying
1
● If you want to reserve a copy job and scan an original while the
machine is printing:
❑
Place your original
➞ press [Start].
For instructions on reserving a copy job, see “Reserved Copying,” on p. 1-18.
8
When scanning is complete, remove your original.
9
If the optional Card Reader-E1 is attached, remove the control
card.
For instructions on using the optional Card Reader-E1, see Chapter 3, “Optional
Equipment,” in the Reference Guide.
10
If you have set Department ID Management, press [ID].
For instructions on using Department ID Management, see Chapter 6, “System
Manager Settings,” in the Reference Guide.
Start
ID