NORAC UC5-BC-HG06 - Manual (Page 20)

17
Figure 16: Valve Module Bracket Installation
Figure 17: Valve Module - Valve Coil Connections
6. Connect cable C04 to one of the valve module CANbus connectors.
7. Route cable C08 from the other CANbus connector to the input module.
8. Insert the 2-pin plug (P01) into the unused 2-pin connectors on the valve module.
9. Route the 12-pin Deutsch connector on C10 toward the input module.
10. Connect the temperature probe to the valve block using the supplied 3/8” x 1/2” bolt.
Tank Port
Pressure Port
Sense Port
Left Tilt Ports
Right Tilt Ports
3 rd Station Ports