3 low profile bracket mounting guidelines – NORAC UC5-BC-JD08A User Manual

Page 17

Text mode
Original mode

6.3 Low Profile Bracket Mounting Guidelines

1. Minimize the distance between the bolts to prevent bending the bracket and prevent the

bracket from loosening over time.

2. Ensure the bracket is mounted tight against the bottom of the boom, minimizing the

distance between the boom structure and the angled flange.

Figure 7: Bracket Mounting Guidelines

A problem can arise if a sensor is not mounted correctly. It is possible for the

sensor to read off of the boom instead of the ground. This may only become
apparent once the control system is switched from soil to crop mode.

Also be careful that the sensor bracket does not collide with any other part of the
boom when the boom is folded to transport position. If possible, mount the sensor
brackets while the booms are folded to ensure they will not cause interference.