NORAC UC4+BC+HD8A - Manual (Page 12)

9
4.2 M
AIN
L
IFT
S
ENSOR
I
NSTALLATION
Figure 7: Main Lift Bracket Assembly
1. Mount the ML bracket (Item B11). Ensure
sensor cable is routed properly and securely
fastened.
2. Mount the Ultrasonic sensor to the bracket.
Ensure the sensor has a clear view of the
ground. Ensure sensor cable is securely
fastened with cable-ties.
3. Approved Hardi brackets may also be used
to mount the main lift sensor.
Figure 8: Main Lift Bracket Installed
Cut 1-2” (25-
50mm) off of tube
Cut 4” (102mm)
off of tube