NORAC UC4+BC+JD7 - Manual (Page 24)

22
Most John Deere Sprayers have
orifices in the "A" and "B" lines
of the boom tilt cylinders. To
remove the orifices you must
remove the fitting from the
cylinder. The orifice is directly
beneath the fitting.
There are multiple versions of JD
load sense blocks on sprayers.
Choose the picture that most
closely resembles your sprayer
valve block and tee in
accordingly.
On some installs the Load sense
hose (H06) may be too long and
the excess hose must be coiled
and secured where it will not
interfere with other components.
Figure 25: Looking towards the rear of the sprayer on a JD4700, JD4710
Rear of
Sprayer
F03
H06