NORAC UC4.5-BC-SS1 - Manual (Page 16)

13
6.2 Roll Sensor Mounting Guidelines
1. When mounting the roll sensors, mount the roll sensor without the temperature probe on
the boom frame and the roll sensor with the temperature probe on the chassis.
Figure 13: Roll Sensor Mounting
2. Ensure the roll sensors are relatively level when the sprayer boom and chassis are level.
3. Both roll sensor cables should be pointing towards the right hand wing of the sprayer.
4. Ensure both roll sensors are mounted adequately and that the cables provide enough slack
to allow sufficient boom roll.
Chassis Roll Sensor
With Temperature Probe
Boom Frame Roll Sensor