NORAC UC4.5-BC-RG4 - Manual (Page 28)

25
6. Install F12 between the tank port and the existing tank line (Figure 25).
7. Tee H05 in to the open port on F12 using F13 (Figure 25).
8. Install F05 between the pressure port and the existing pressure line with F11 (Figure 25).
9. Tee H04 in to the open port on F05 using F14 (Figure 25).
10. Route hoses H04 and H05 from the tee(s) to the NORAC valve block to supply pressure
and tank respectively.
Figure 25: Hydraulic Plumbing at Sprayer Valve Block