ClearSounds CSC50-ER User Manual

Page 19

IMPORTANT: This feature will not work with answering machines or voice mail services.
All answering machine or systems connected to the same phone number as your CSC50-
ER must be unplugged.

Activate the Remote Audio Monitoring Feature
In the hook position,

1. Press

the

MUTE button.

2. Using the

arrow buttons, highlight <>.

3. Press

the

OK button to confirm.

4. Using the

arrow buttons, scroll to select <>.

5. Press

the

OK button.

6. Using the arrow buttons select << ON>> (“OFF” to deactivate).
7. Press

the

OK button.

8. Press

the

C button twice (2) times to exit.

Setting/Modifying Remote Audio Monitoring Access PIN Code
This feature sets the speakerphone to identify the selected number for Remote Audio
Monitoring. The Access PIN code is factory preset to the sequence 1234. If you wish to
modify it, follow these steps:
In the hook position,

1. Press

the

MUTE button.

2. Using the

arrow buttons, highlight <>.

3. Press

the

OK button to confirm.

4. Using the

arrow buttons scroll to select <>.

5. Press

the

OK button.

6. Use

the

C button to delete preset digits.

7. Enter your new code (max 4 digits) and press the OK button.
8. Press

the

C button twice (2) times to exit.

Using the Remote Audio Monitoring Feature
The following instructions are for someone to call you, the CSC50-ER Emergency Con-
nect user, to call back after responding to your initial emergency call or in case they did
not hear from you as expected. Please give a copy of these important instructions to the
appropriate persons for quick reference.

1. Provide your selected callers with a Caller PIN code.
2. Dial as you would a regular phone call. You will hear a “beep” after 10 dialing

tones.

3. You will have 10 seconds to enter the Remote Audio Monitor Access PIN Code on

your keypad (the access code is 1234 unless it has been changed). This turns on
the speakerphone of the CSC50-ER phone and allows you to listen in and have a
two-way conversation.

4. Every two (2) minutes, you will hear another “beep” and will need to press any of the

0-9 keys to continue; otherwise the CSC50-ER will hang up.