Mytek Digital Protools HD DIO Card (ver. 1.1 / Oct 2010) - Manual (Page 29)

Mytek Protools-HD DIO Card – User Manual
7. Attach power cord and other cabling.
8. Turn on the converter.
For about 2 seconds no LED's should be lit on the
converter’s front panel, as new software is copied from
memory to the main board chips. Then, all LED's should
turn on momentarily for about 10-20sec, and subsequently
the unit should begin normal operation.
The Protools HD DIO card also contains a similar EPROM
memory chip that may require future upgrades should
such a need arise due to Protools software revisions or
implementation of additional features.
Check Mytek webpage for information on the latest
firmware versions.
www.mytekdigital.com
User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 29 / 29